Modelling of a tubular solid oxide fuel cell with different designs of indirect internal reformer

The cell performance and temperature gradient of a tubular solid oxide fuel cell with indirect internal reformer(IIR-SOFC) fuelled by natural gas, containing a typical catalytic packed-bed reformer, a catalytic coated wall reformer, a catalytic annular reformer, and a novel catalytic annular-coated wall reformer were investigated with an aim to determine the most efficient internal reformer system. Among the four reformer designs, IIR-SOFC containing an annular-coated wall reformer exhibited the highest performance in terms of cell power density(0.67 W cm-2)and electrical efficiency(68%) with an acceptable temperature gradient and a moderate pressure drop across the reformer(3.53×10-5kPa).IIR-SOFC with an annular-coated wall reformer was then studied over a range of operating conditions: inlet fuel temperature, operating pressure, steam to carbon(S : C) ratio, gas flow pattern(co-flow and counter-flow pattern), and natural gas compositions. The simulation results showed that the temperature gradient across the reformer could not be decreased using a lower fuel inlet temperature(1223 K–1173 K)and both the power density and electrical efficiency of the cell also decreased by lowering fuel inlet temperature. Operating in higher pressure mode(1-10 bar) improved the temperature gradient and cell performance. Increasing the S : C ratio from 2 : 1 to 4 : 1 could decrease the temperature drop across the reformer but also decrease the cell performance. The average temperature gradient was higher and smoother in IIR-SOFC under a co-flow pattern than that under a counter-flow pattern, leading to lower overpotential and higher cell performance. Natural gas compositions significantly affected the cell performance and temperature gradient. Natural gas containing lower methane content provided smoother temperature gradient in the system but showed lower power density and electrical efficiency.     

高内相乳液法制备整体柱及其分离性能研究

建立了高内相乳液(HIPE)法制备以甲基丙烯酸十二烷酯为功能单体(LMA),二乙烯基苯(DVB)为交联剂的新型毛细管电色谱整体柱。polyHIPE整体柱利用扫描电镜与BET进行了表征,表明了制备的整体柱具有较大的孔径与较好的比表面积,更好的通透性,可更好地满足高效快速分离分析的需要。实验中K2S2O8不仅可以作为引发剂,同时加热后残基能为固定相提供电渗流。优化表面活性剂span80含量、W/O比例对整体柱制备的影响,以硫脲与苯系物为目标化合物考察了整体柱的分离性能与效果。该方法用实际水样品苯系物分析,取得良好的效果。     

Direct determination of melamine in dairy products by gas chromatography/mass spectrometry with coupled column separation

A coupled capillary column system was developed for the qualitative and quantitative determination of melamine with isotope internal standard in dairy products by gas chromatography/mass spectrometry (GC/MS) without derivatization. A 30 m of DB-5ms ((5%-phenyl)-methylpolysiloxane, 0.25 mm i.d., 0.25 μm df) coupled with a 1.5 m of Innowax (polyethylene glycol, 0.32 mm i.d., 0.25 μm df) by a quartz capillary column connector was introduced as separation column. Three advantages were discussed for the coupled system. The sample was fortified with a ring-labeled ¹³C₃¹⁵N₃-melamine as an isotope internal standard and extracted by 1% of trichloroacetic acid aqueous solution. 2.2% of lead acetate solution was then added to deposit protein in the sample matrix. After purification by cation exchange cartridge, the sample solution was directly injected and detected by GC/MS. A six-point calibration curve ranging from 0.05 to 2 mg kg⁻¹ of melamine in sample was used to establish instrument response. The recovery was 93.9-102% with relative standard deviation from 3.1 to 8.7% when isotope internal standard used. The calculated method detection limit was 0.01 mg kg⁻¹.     

An overview of analytical methodologies for the determination of antibiotics in environmental waters

The widespread occurrence of antibiotics as contaminants in the aquatic environment has increased attention in the last years. The concern over the release of antibiotics into the environment is related primarily to the potential for the development of antimicrobial resistance among microorganisms. This article presents an overview of analytical methodologies for the determination of quinolone (Qs) and fluoroquinolone (FQs), macrolide (MLs), tetracycline (TCs), sulfonamide (SAs) antibiotics and trimethoprim (TMP) in different environmental waters. The analysis of these antibiotics has usually been carried out by high-performance liquid chromatography (HPLC) coupled to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) and to a lesser extent by ultraviolet (UV) or fluorescence detection (FD). A very important step before LC analysis is sample preparation and extraction leading to elimination of interferences and prevention of matrix effect and preconcentration of target analytes.     

Determination of thyreostats in urine and thyroid gland by ultra high performance liquid chromatography tandem mass spectrometry

Thyreostatic compounds could be illegally administered to animals in order to obtain a weight gain due to a higher retention of water in the edible tissue and the gastro-intestinal tract. In the European Union their use for animal production is banned since 1981. Recently a highly sensitive method exploiting the determination of thyreostats with 3-iodobenzylbromide prior to purification to determine thyreostats in urine and other matrices was reported. For the first time, the UPLC instrumentation was used to separate the 3-iodobenzyl derivatives of various thyreostats. The deuterated internal standards tapazole-d₃ and propylthiouracil-d₅ were for the first time used for the quantification of tapazole, thiouracil, methylthiouracil, propylthiouracil, phenylthiouracil and mercaptobenzimidazole. The confirmative quantitative liquid chromatographic tandem mass spectrometric (LC–MS/MS) method was validated according to Commission Decision 2002/657/EC. The decision limit (CCα) and the detection capability (CCβ) were found to be for all compounds below the recommended value of 10 μg kg⁻¹.     

Quantitative analysis of human serum leptin using a nanoarray protein chip based on single-molecule sandwich immunoassay

We report a method for the quantitative analysis of human serum leptin, which is a protein hormone associated with obesity, using a nanoarray protein chip based on a single-molecule sandwich immunoassay. The nanoarray patterning of a biotin-probe with a spot diameter of 150 nm on a self-assembled monolayer functionalized by MPTMS on a glass substrate was successfully accomplished using atomic force microscopy (AFM)-based dip-pen nanolithography (DPN). Unlabeled leptin protein molecules in human serum were detected based on the sandwich fluorescence immunoassay by total internal reflection fluorescence microscopy (TIRFM). The linear regression equation for leptin in the range of 100 zM-400 aM was determined to be y = 456.35x + 80,382 (R = 0.9901). The accuracy and sensitivity of the chip assay were clinically validated by comparing the leptin level in adult serum obtained by this method with those measured using the enzyme-linked immunosorbent assay (ELISA) performed with the same leptin standards and serum samples. In contrast to conventional ELISA techniques, the proposed chip methodology exhibited the advantages of ultra-sensitivity, a smaller sample volume and faster analysis time.     

自愿性披露内部控制鉴证报告的影响因素——基于2008年沪市A股数据的实证研究

对2008年我国沪市854家A股上市公司自愿披露内部控制鉴证报告的影响因素进行实证研究.研究发现:公司规模、行业门类、当前状态、股权集中度对公司自愿披露内部控制鉴证报告具有显著影响;股票种类、上市时间、盈利能力、董事会规模、审计意见对公司自愿披露内部控制鉴证报告的影响次之;而公司成长性、融资计划以及是否违规对公司自愿披露内部控制鉴证报告的影响较弱.     

Comparison of the activation time effects and the internal energy distributions for the CID,PQD and HCD excitation modes

Reproducibility among different types of excitation modes is a major bottleneck in the field of tandem mass spectrometry library development in metabolomics. In this study, we specifically evaluated the influence of collision voltage and activation time parameters on tandem mass spectrometry spectra for various excitation modes [collision‐induced dissociation (CID), pulsed Q dissociation (PQD) and higher‐energy collision dissociation (HCD)] of Orbitrap‐based instruments. For this purpose, internal energy deposition was probed using an approach based on Rice–Rampserger–Kassel–Marcus modeling with three thermometer compounds of different degree of freedom (69, 228 and 420) and a thermal model. This model treats consecutively the activation and decomposition steps, and the survival precursor ion populations are characterized by truncated Maxwell–Boltzmann internal energy distributions. This study demonstrates that the activation time has a significant impact on MS/MS spectra using the CID and PQD modes. The proposed model seems suitable to describe the multiple collision regime in the PQD and HCD modes. Linear relationships between mean internal energy and collision voltage are shown for the latter modes and the three thermometer molecules. These results suggest that a calibration based on the collision voltage should provide reproducible for PQD, HCD to be compared with CID in tandem in space instruments. However, an important signal loss is observed in PQD excitation mode whatever the mass of the studied compounds, which may affect not only parent ions but also fragment ions depending on the fragmentation parameters. A calibration approach for the CID mode based on the variation of activation time parameter is more appropriate than one based on collision voltage. In fact, the activation time parameter in CID induces a modification of the collisional regime and thus helps control the orientation of the fragmentation pathways (competitive or consecutive dissociations). Copyright © 2014 John Wiley & Sons, Ltd.     

On the existence,uniqueness and stability of solutions for semi-linear generalized elasticity equation with general damping term

In this paper, we consider a semi-linear generalized hyperbolic boundary value problem associated to the linear elastic equations with general damping term and nonlinearities of variable exponent type. Under suitable conditions, local and global existence theorems are proved. The uniqueness of the solution have been gotten by eliminating some hypotheses that have been imposed by other authors for different particular problems. We show that any solution with nontrivial initial datum becomes stable.